Skip to site navigation

Broadband: Technicolor TG 582 - Wireless Setup Guide

Expand / Collapse

Broadband: Technicolor TG 582 - Wireless Setup Guide

Aim of this article:

This guide describes the wireless setup process for the Technicolor TG 582 using WPA encryption.

Configuring the router:

  1. Open an Internet browser.  By default you will see the Technicolor welcome page.  If the Technicolor welcome page does not appear automatically you can start the setup wizard by browsing to:
  2. Click on Home Network from the menu on the left.

    Technicolor TG 582 - Setup page
  3. From the Home Network page, click on the wireless network name - WLAN: TNCAPxxxxxx.

    Technicolor TG 582 - Home Network page
  4. Click Configure in the top, right-hand, corner.

    Technicolor TG 582 - Wireless network page
  5. Configure the settings for your wireless interface as you require - using the fields shown in the screenshot below:

    Technicolor TG 582 - Wireless Access Point page

    Interface Enabled: Ticked
    Power Reduction Enabled: Leave unticked
    Network Name (SSID): This is the name of your wireless network
    Channel Selection: Automatic
    Allow Multicast from Broadband Network: Ticked
    Broadcast Network Name: Ticked
    Allow New Devices: New stations are allowed (automatically)
    Encryption: Use WPA-PSK Encryption
    WPA-PSK Encryption Key: Leave as default
    WPA-PSK Version: WPA+WPA2
  6. Click Apply.

The router will now be setup with wireless access using WPA encryption.  You can now connect tot he router using the Network Name (SSID) and the wireless encryption key.

Rate this Article:

Feedback on this Article

Comment require login or registration.

Rated 4 stars based on 5 votes.
Article has been viewed 15,328 times.

Skip to site navigation